printslong.blogg.se

Glock 17 gen 3
Glock 17 gen 3








glock 17 gen 3

The first stage of taking the replica apart is the same as in a real firearm: you pull out the magazine, pull the slide lock down and pull the slide forward. As the replica is made using the TM standard, getting a spare magazine that fits the replica should not be a problem. The magazine is gas tight, we did not notice any leakage on in the magazine or the valves. On the back of the magazine there are imitations of the holes showing how many rounds are left in the magazine, and under it, a small Glock logo. Another method is to insert the capsule from the bottom by pulling off the plastic floor, pulling up BB feeder spring and then unscrewing the bottom screw. One of them is to insert it from the side, unscrewing the screw with an Allen key through the hole in the bottom of the magazine. The replica is powered by CO2, and the gas capsule is placed in the magazine by unscrewing a screw, which is located under the plastic floor of the magazine. It should be added that in the case of generation IV Glocks, there is an option of replacing the rear part of the grip to better adjust it to ones hand. In addition, the grip on the front has two ergonomic nubs.

glock 17 gen 3

At the front and back of the grip we can also find anti-slip texture, in the form of small ribs. The pistol grip has a anti-slip texture on the sides, reminiscent of Stippling or sandpaper. If you want to replace them with a different type, you just need to take off the rear and front sight and then unscrew the two Phillips screws situated on the inside of the slide. It is situated above the pistol grip.Ĭlassic open, plastic, detachable sights have been mounted on the slide. An addition, thanks to which we can distinguish the replica from the firearm, is the marking Officially Licensed Product of Glock which replaces the original MADE IN AUSTRIA. We will find almost all the elements present in the real firearm: the company's logo on the slide together with the version designation and the standard AUSTRIA note, the markings on the ejection port, corresponding to the ones on the slide and the Glock logo on the pistol grip. However, it should be noted that both versions present a very high level of workmanship and, compared with other replicas available on the market, they perform much better.Īll replicas of the gun from Umarex have full, licensed Glock markings. The main difference in the material used for the slide: it can already be seen in the texture of the paint, but the most noticeable is the difference in the workings of the slide. The plastic the frame is made off looks quite good, it does not differ much from the Deluxe version. The replica comes to us in a gray and black box with the Glock logo on top. The version by KWC is slightly less outstanding, but also cheaper. This special design of the return mechanism perfectly imitates the work of the slide - this impression is difficult to describe, you just have to try it. The metal slide made using CNC technology also makes a very good impression: there is virtually no slack and you can feel the resistance of the return spring during reloading. The plastic, from which the pistol grip is made, ideally imitates the one used in the real firearm. After taking the replica into ones hand, you get a brief the impression of holding a real gun.

glock 17 gen 3

Thanks to the official Glock license, the VFC Deluxe version is delivered in a black plastic case filled with sponge foam, exactly the one used to sell the real firearm in.










Glock 17 gen 3